contact us for product information. we can be reached at (269) 382-2050.
Subscribe to the Kalamazoo Industries youtube channel and click the notification bell to be alerted when we upload new videos

DS12V 12 Inch Disc Sander & Vacuum Base

The DS12V disc sander with vacuum base is designed for any shop looking to sand ferrous and non-ferrous metals (whether it’s metal, aluminum, plastic and or wood) while keeping  their work area clean.

This 12 inch disc sander comes with dust collector base, steel work table tilts down to 45 degrees and up to 90 degrees,  access door in the vacuum base for easy clean out, cloth bag filter over the flow thru vacuum motor can be removed, shaken out and easily replaced, 1 hp motor directly drives the 12″ diameter disc, aluminum disc holder and one PSA adhesive discs abrasive disc.

DS12V 12 Inch Disc Sander & Vacuum Base has an enclosed base housing a 100 CFM vacuum dust collector to help contain abrasive particles produced during sanding. This can greatly improve the environmental conditions inside a shop. A door in the base allows easy access to the cloth bag filter, which can be removed, shaken out and easily replaced. Other features include a steel work table that tilts down to 45 degrees and up to 90 degrees, a 1 HP, 1 PH 110V direct drive motor, and a 12-inch diameter disc holder that accepts peel and stick PSA abrasive discs.

DS12V 12 Inch Disc Sander & Vacuum Base specifications

  • Complete with enclosed stand and 100 CFM vacuum dust collector.
  • 1 HP, 1 PH 110V,   Dims: L12″ x W14″ x H46″
  • 12″ aluminum disc holder.
  • Angle gauge.
  • Adjustable steel work table that goes from 90 degrees to 45 degrees down.
  • Vacuum clean out access door.
  •  Replaceable cloth filter bag #5X878
  • Single phase disc sander amp draw: 115V 12.8 amps and 230V 6.4 amps.
  • Single phase vacuum motor amp draw: 115V 8.2 amps. 
  • Shipping dimensions: L 27″ x W 27″ x H 49″
  • Shipping weight: 170 lbs
  • Optional: 3PH unit call for pricing.
  • Made in USA !!

This machine is great for but not limited to the following applications

  • Bevel an Deburr
  • Square and End
  • Round Flat Corners

Part replacement

All parts that Kalamazoo Industries manufacture’s for this DS12V 12 inch industrial disc sander are replaceable no matter the age of this unit and all parts are kept in stock.

Where this equipment can be used

DS12V 12 Inch Disc Sander & Vacuum Base product is designed to be used in the following industries: Energy, Oil/Natural Gas, Petro/Chemical, Knife Manufacturing, Automotive, Metal Foundries, as well as many other Manufacturing and Fabrication shops.

DS12V 12 Inch Disc Sander & Vacuum Base, 12 inch disc sander, disc sander & vacuum base, vacuum, shop
purchase parts
Parts list
DS12V manual
Cut Sheet