S6MS 6 x 48 inch belt sander and stand
The 6 x 48 inch industrial sander features include the following: multi-position sanding head that can be place in a various positions, 6.5″ x 14″ reversable platen, floor stand, 3HP 1PH 110/220V or 3PH 220/440V TEFC motor, spring belt tension, quick part replacement, quick belt tracking, removable platen and adjustable work table.
The S6MS 6 x 48 inch belt sander is a multi position belt sander is manufactured for general material removal such as sanding, rounding an end and or just deburring.
This S6MS 6 x 48 inch belt sander and stand multi-position belt sander was designed also to accommodate many different style 6” x 48” belts so you can achieve your desired finish.
The 6 x 48 inch belt sander can accommodate all 6″ x 48″ sanding belts so you can achieve your desired finish. What is great for this belt sander is that it can sander ferrous metals, non-ferrous metals, plastics and wood.
S6MS 6 x 48 inch belt sander and stand specifications
- S6MS – 6″ x 48″ belt.
- Variable position belt sanding head.
- Direct drive.
- One lever quick belt release.
- Cast iron frame.
- Cast iron base.
- Full OSHA safety guard, Heavy duty steel stand.
- 3 HP motor 3450 RPM, 1 phase or 3 phase, manual switch, 3500 SFPM
- Reversible and replaceable steel platen 6 1/2″ x 14″ (S6M), 6 1/2″ x 19 1/2″ ( S660M)
- Adjustable cast iron work table 6″ x 10″ with 5/8 inch slot.
- Option: JIC controls.
- Single phase amp draws: 110V 24 amps and 220V 12 amps.
- Three phase amp draws: 220V 8.4 amps and 440V 4.2 amps.
- Shipping weight shipping weight: 230 lbs
Other 6 x 48 inch belt sander models
- Model: S6 sander head only, less motor. WT: 130LBS
- Model: S6M-1 3hp, 1 phase, 110 or 220, LESS stand.
- Model: S6M-3 sander, 3 hp, 3 phase, LESS stand
- Model: S6MS-5 ,5 HP, 3 PH other features same as above.
- Model: S660MS 6″ x 60″, 3 hp, other features same as above, platen 6 1/2″ x 19 1/2″
- Model: S6MW 3HP 1PH or 3PH wet sander. Click here to be taken to it’s web page.
- Model: S6MV 3HP 1PH or 3PH sander with vacuum base. Click here to be take to it’s web page.
- Model: S660MW 6 x 60 inch wet sander. Click here to be take to it’s web page.
This machine is great for but not limited to the following applications
- Bevel an Deburr
- Square and End
- Round Flat Corners
All parts that Kalamazoo Industries manufacture’s for the S6MS 6 x 48 inch industrial abrasive belt sander are replaceable no matter the age of this unit. All parts are kept in stock.
Where this equipment can be used
All S6MS 6 x 48 inch industrial belt sander & stand are manufactured to be used in the following industries: Energy, Oil/Natural Gas, Petro/Chemical, Knife Manufacturing, Automotive, Metal Foundries, as well as many other Manufacturing and Fabrication shops.
All Kalamazoo Industries machines are designed, manufactured and assembled in Kalamazoo, MI USA.