Kalamazoo Industries S6MS 6 x 48 industrial belt sander & stand is a multi position belt sander. All that you need to do is loosen a couple of socket head cap screws slightly adjust accordingly then re-secure hardware. This unit is great for sharpening and general deburring.
Kalamazoo Industries S6MS 6 x 48 industrial belt sander & stand features a 6.5″ x 14″ reversable platen and 6″ x 10″ work table with a 1/2″ x 1/8″ slot.
Kalamazoo Industries S6MS 6 x 48 industrial belt sander & stand also features a powerful 3HP 1PH, 110V or 220V or 3PH, 220V or 440V (specify voltage and phase at order) motor.
This belt sander can accommodate all 6″ x 48″ belts so you can achieve your desired finish.
Kalamazoo Industries S6MS 6 x 48 industrial belt sander & stand has applications in the following industries: Energy, Oil/Natural Gas, Petro/Chemical, Knife Manufacturing, Automotive, Metal Foundries, as well as many other Manufacturing and Fabrication environments.
Also available in 6″ x 60″ belt, wet or dry. See S660M , S660MS, S660MW
Industry standard. 3 HP !! Real workhorse !! Every shop needs one !! Also available in 5 HP and in 6″ x 60″ belt!
- S6MS – 6″ x 48″ belt, variable position, direct drive, 1 lever quick belt release !!!
- Cast iron frame, Full OSHA safety guard, Heavy duty steel stand.
- 3 HP motor 3450 RPM, 1 phase or 3 phase, manual switch, 3500 SFPM
- Reversible platen 6 1/2″ x 14″ (S6M), 6 1/2″ x 19 1/2″ ( S660M)
- Cast iron work table 6″ x 10″ with 1/2″ x 1/8″ slot
- Option: JIC controls
- Dimensions: L22″ x W14″ x H56″
- Wt: 230 lbs
- Model: S6 sander head only, less motor. WT: 130LBS
- Model: S6M-1 3hp, 1 phase, 110 or 220, LESS stand.
- Model: S6M-3 sander, 3 hp, 3 phase, LESS stand
- Model: S6MS-1 , 3 hp, 1 phase, 110 or 220 volt, w/Stand ( 110 volts @34amps)Model: S6MS-3, 3 hp, 3 phase, 220/440 volt, w/Stand, Wt: 230 lbs.
- Model: S6MS-5 ,5 HP, 3 PH other features same as above.
- Model: S660MS 6″ x 60″, 3 hp, other features same as above, platen 6 1/2″ x 19 1/2″
Kalamazoo Industries S6MS 6 x 48 Industrial Belt Sander & Stand is great for any size shop, whether is a small shop or a large shop and can accommodate any form of 6″ x 48″ sanding belt. Kalamazoo Industries S6MS 6 x 48 Industrial Belt Sander & Stand unit can sand many forms of material.
Need a dust collector with your sander? Check out the S6MV belt sander with vacuum base. The dust collect comes with a spark arrester and the CFM is 400.
Also available S6MS-5 6″ x 48″ sander with stand comes with a 5HP 3PH and S6MW 6″ x 48″ wet belt sander and S660MW 6″ x 60″ wet belt sander.
Need to sand larger material? Check out out S8D, S8HD, S8W and S8HW 8″ x 60″ belt sanders