2FSMV 2 x 48 inch belt sander & vacuum base
The 2FSMV belt sander with dust collection base was designed for general material removal whether you’re sanding, rounding an end, deburring and or polishing while keeping your work space clean. This machine was designed to be compact that run’s on 115V so it will work in any workshop
2FSMV 2 x 48 inch heavy duty sanding tool features include the following: 2” x 48” belt sander, 1/2HP 1PH 110V TEFC motor, spring belt tension, quick part replacement, quick belt tracking, vacuum base with replaceable filter, removable steel platen and adjustable steel work table.
The 2FSM 2 x 48 inch industrial belt sander with dust collector base was designed also to accommodate many different style 2” x 48” belts so you can achieve your desired finish. Because the platen and work table are removable you can slack belt sand which allows the belt to conform to most round material.
This industrial belt sander & vacuum base works great with most material whether its wood, metal and or plastic (don’t mix materials). This compact unit works great in any size shops whether it’s a small home shop up to a large production factility. This unit can handle any 2″ x 48″ belt so you can achieve your desired finish.
2FSMV 2 x 48 inch abrasive belt sander with vacuum base specifications
- 1/2 HP motor
- 1ph, 3450 RPM
- 2″x48″ belt, contact wheel, tilt table and removable platen
- Full hinged osha guard for quick belt change
- Adjustable and removable steel work table. Adjusts up to 20 degrees up and 45 degrees down. Work table size: 5″ W x 2.5″ D
- Adjustable and removable steel platen. Platen size: 2.75″ W x 8″ H.
- Mounted on DCV-4 dust collector 100 CFM.
- 2FSMV weight: 120 lbs
- Sander shipping dimensions: L 12″x W 12″x H 28″
- Dust collector shipping dimensions: L 20″ x W 20″ x H 37
- Sander single phase amp draw: 115V 7 and 220V 3.5
- Vacuum amp draw: 110V 8.2 amps
- Drive wheel size is 5″.
- Surface feet per minute is 4500.
- Options: 1/2Hp 3Ph 220 or 440v, 1/2Hp 1Ph 50Hz.
- Uses: light deburring and blade sharpening.
This machine is great for but not limited to the following applications
- Bevel an Deburr
- Square and End
- Round Flat Corners
What material this unit is designed to sand
This sander can sand both ferrous and non-ferrous materials with the right sanding belt. Below is a short list of materials. Please note: that the vacuum base NEEDS to be CLEAN OUT every time you switch material. If you don’t a fire can possibly start in the vacuum.
Other 2 x 48 inch belt sander options
- 2FSM 2 x 48 inch multi position belt sander with motor. Click here to go to its web page.
- 2FS 2 x 48 belt sander less motor. Click here to go to its web page.
All parts that Kalamazoo Industries manfacturere’s for the 2FSMV industrial abrasive sanding tool with vacuum base regardless of the unit age and are kept in stock.
Where this equipment can be used
Kalamazoo Industries 2FSMV 2 x 48 belt sander & vacuum base tool has applications in the following industries: Energy, Oil/Natural Gas, Petro/Chemical, metallurgical labs, automotive, metal foundries, machine workshops, cabinetry workshops , as well as many other Manufacturing and Fabrication work shops.
All Kalamazoo Industries machines are designed, manufactured and assembled in Kalamazoo, MI USA.