chop saws
-
044-008 trunnion pillow block bearing is for the 26 inch chop saws with 20HP 3PH motors. This industrial bearing has a grease point which will extend it life. -
049-022 14 INCH INDUSTRIAL CUTOFF SAW MOTOR BUSHING
049-022 14 inch industrial cutoff saw motor bushing fixes the motor pulley (560-002) to the motor all 14 inch straight and mitre cutoff saws. -
051-006 14 INCH INDUSTRIAL CUTOFF SAW V-BELT SET
051-006 14 inch industrial cutoff saw v-belt set consist of two v-belts that are used to connect the motor to the spindle. Used on our ferrous and high speed non-ferrous 14 inch saws.
-
142-9901 replacement dust bag for DCV-1 dust collector. -
292-047 10 INCH METALLURGICAL SAW SPINDLE AND FLANGE
292-047 10 inch metallurgical saw spindle and flange is directly mounted to the saw motor spindle and fixed with three set screws.
-
294-018 flow control valve for the 14 inch and 20 inch abrasive chop saw air/oil power down feed systems. Inlet/Outlet port size 3/8" NPT -
294-017 flow control valve for air/oil power down feed system for the 26 inch abrasive chop saws and larger. Inlet/Outlet port sizes 1/2" NPT Hydraulic flow control valve -
294-018 quick exhaust valve for used for use the 14 inch and 20 inch abrasive chop saw air/oil power down feed systems. Valve function: quick exhaust Type of operation: pressure differential Number of ports: 3 ports Number of positions: 2 positions Port size: 1/4 NPT Lubrication: not required Media filtration: not required -
431-003 7 INCH AND 8 INCH ABRASIVE CUTOFF SAW VISE BLOCK
431-003 7 inch and 8 inch abrasive cutoff saw vise block is the vise jaw for the K7B and K8B chop saws. -
560-001 14 INCH INDUSTRIAL CHOP SAW SPINDLE PULLEY
560-001 14 inch industrial chop saw spindle pulley is a two v-belt pulley used on both our ferrous and non-ferrous cutoff saw. -
560-057 replacement v-belt motor pulley for the K20SSF-20 industrial dry abrasive chop saws K20SW-20HP wet cutoff saws and KM20-22/20 iabrasive mitre saws.
