002-002 14 INCH INDUSTRIAL CUTOFF SAW ARM
002-004 14 inch industrial cutoff saw arm is a cast iron arm with a slot milled, drilled and taped into the arm so an air cylinder can be mounted onto the arm.
HS14ASDC 14 inch arm assembly replacement parts.
-
044-001 INDUSTRIAL CHOP SAW AND BELT SANDER BALL BEARING
044-001 industrial chop saw and belt sander ball bearing is used in various ferrous and non-ferrous chop saws and belts sanders. -
051-006 14 INCH INDUSTRIAL CUTOFF SAW V-BELT SET
051-006 14 inch industrial cutoff saw v-belt set consist of two v-belts that are used to connect the motor to the spindle. Used on our ferrous and high speed non-ferrous 14 inch saws. -
051-035 14 INCH CHOP SAW V-BELT TENSIONING TOOL
051-035 14 inch chop saw v-belt tensioning tool is designed to be placed between the motor and spindle pulley to put tension on the belts.
-
342-086 14 INCH INDUSTRIAL CHOP SAW INNER BELT GUARD
342-086 14 inch industrial chop saw inner belt guard keeps the operators fingers away from the v-belts and secondly holds the plastic outer v-belt guard. -
381-002 14 INCH INDUSTRIAL CHOP SAW HANDLE WITH GRIP
381-002 14 inch industrial chop saw handle with grip is manufactured out of steel handle with plastic grip and it used on all 14 cutoff saw.
-
455-007 14 inch high speed saw wheel guard lever. Is used on the blade guard for the retractable steel clam shell guard on the 14 non-ferrous saws. -
537-026 14 INCH ABRASIVE CHOP SAW SPINDLE NUT
537-026 14 inch abrasive chop saw spindle nut secures the abrasive cutoff wheel between the tight and loose flanges. Used only on 14" saws. -
562-034 14 INCH INDUSTRIAL CUTOFF SAW TRUNNION PIN
562-034 14 inch industrial cutoff saw trunnion pin is a steel pin with slots milled so grease will extended of life of the pin and trunnion. -
701-002HS 14 INCH NON-FERROUS SAW SPINDLE WITH FLANGE
701-002HS 14 inch non-ferrous saw spindle with flange is an all steel spindle and tight flange designed for all 14 inch industrial high speed non-ferrous saws.
-
710-118 14 INCH CHOP SAW 1PH 230V MAGNETIC SWITCH
710-118 14 inch chop saw 1ph 230V magnetic switch turns the saw on and off. The saw will remain off if there is a loss of power. -
710-135 replacement 3PH 480V magnetic on-off switch. For the following units K12-14B-3, K12-14SF-3, K12-14SS-3, KM14-3, HS14-3 and KM14HS-3 O-L Relay 6 - 8 Amps