BG214 dual 3 x 132 inch industrial backstand grinder

BG214 backstand grinder features dual 3” x 132” belt grinding heads for fast metal removal!  This machine was designed to meet a customer certain application in his shop and is now a standard belt grinders. This dual belt grinding unit allows the operator to run multiple belt grits at once on one grinder unit. The dual belt grinding heads of the BG214 nearly eliminates grinder down time, increases operator productivity and increases product output.

The BG214 backstand grinder other features are easy access design that allows the operator to access the 14” x 3” contact wheel with full left to right movement so they can snag, roughing, contouring, angles and shaping 15HP 3PH 220V or 440V motor, isolation pads, replaceable v-belts, two 6 inch vacuum ports (one on each belt guard).

BG214 dual 3 x 132 inch heavy duty backstand grinder is great industrial piece of equipment for steel foundries, aggressive grinding, descaling, deburring, and finishing.

BG214 dual 3 x 132 inch industrial backstand grinder

  • 15Hp 3Ph 220 or 440v (please specify).
  • Dual 14″ x 3″ 70″ duro serrated contact wheel.
  • Dual 3″x 132″ belt.
  • 6300 SFPM.
  • Back stand tracking.
  • Easy setup.
  • Easy clean out.
  • A 6″ vacuum port on both belt guards.
  • Magnetic switch.
  • Isolation pads.
  • Made In USA!
  • Optional: parts table. It has to be ordered and built with machine.  Can’t be add in the field.
  • Shipping weight: 2000 lbs. 
  • Shipping dimensions: L 58″ x W 74″ x H 64″
  • Amp draws: 208V 26.5 amps, 220V 24 amps and 440V 12.5 amps.  
  • Easy to replace parts and change belts.
  • Options: variable speed drive, work table (see picture below) and other size backstand grinding units available, variable speed drive (used for soft start up).

This grinding unit is designed to be used for the following but not limited to the following applications

  • Bevel and Deburr
  • Square an End
  • Round Corners
  • Flat work
  • Contouring
  • Heavy metal removal

Part replacement

All parts that Kalamazoo Industries manufacture’s for this BG214 backstand grinder are replaceable no matter the age of this unit and all parts are kept in stock.

Where this unit heavy duty sander can be used

This abrasive belt grinder is great for sharpening blades, knives, fabrication shop, machine shop and various other grinding applications while keeping your work area clean. Comes standard with a 6 inch vacuum port on each belt guard.

BG214-6 6″ x 132″ backstand grinder specials

How to change your backstand grinder belt

BG214 dual 3 x 132 inch heavy duty backstand grinder, dual 3 x 132 inch heavy duty backstand grinder, 3 x 132 inch heavy duty backstand grinder, heavy duty backstand grinder, backstand grinder, 3 x 132 inch, belt grinder, vacuum, port, shop

Special Width Backstand Grinders available

BG214-6 6″ x 132″ Backstand Grinder

Bg214-2 2″ x 132″ Backstand Belt Grinder

Backstand Grinder Option

Work table is optional and has be order when machine is order.  Can’t be added after it’s in the field.

BG214 dual 3 x 132 inch heavy duty backstand grinder, dual 3 x 132 inch heavy duty backstand grinder, 3 x 132 inch heavy duty backstand grinder, heavy duty backstand grinder, backstand grinder, grinder, vacuum, port, shop