Admin

/Admin

About Admin

This author has not yet filled in any details.
So far Admin has created 360 blog entries.

Kalamazoo Industries 2FSMV 2 x 48 belt sander with vacuum base

By | 2018-05-23T09:20:09+00:00 May 23rd, 2018|News|

The Kalamazoo Industries 2FSMV 2 x 48 belt sander with vacuum base was designed for general material removal whether you’re sanding, rounding an end and or just deburring while keeping your work space clean. This units features include the following: 2” x 48” belt sander, 1/2HP 1PH 110V TEFC motor, spring [...]

Comments Off on Kalamazoo Industries 2FSMV 2 x 48 belt sander with vacuum base

Kalamazoo Industries S6MS 6 x 48 inch multi position sander

By | 2018-05-21T09:13:27+00:00 May 21st, 2018|News|

The Kalamazoo Industries S6MS 6 x 48 inch multi position sander was designed for general material removal whether you’re sanding, rounding an end and or just deburring.  This units features include the following: multi-position sanding head that can be place in a various positions, floor stand, 3HP 1PH 110/220V or [...]

Comments Off on Kalamazoo Industries S6MS 6 x 48 inch multi position sander

S4S 4 x 36 inch Kalamazoo Industries industrial belt sander

By | 2018-05-18T11:16:43+00:00 May 18th, 2018|News|

S4S 4 x 36 inch Kalamazoo Industries industrial belt sander was designed for general material removal whether you’re sanding, rounding an end and or just deburring.  The Kalamazoo Industries S4S 4” x 36” industrial belt sander features include the following: vertical/horizontal sanding head, 1/2HP 1PH 110V TEFC motor, spring belt tension, [...]

Comments Off on S4S 4 x 36 inch Kalamazoo Industries industrial belt sander

1SK6 Kalamazoo Industries multi use combination sander

By | 2018-05-11T08:44:27+00:00 May 11th, 2018|News|

1SK6 Kalamazoo Industries multi use combination sander features a 1” x 42” belt sander attachment, 1/3HP 1PH 110V motor, spring belt tension, easy tracking, 6” removable grinding stone, removable tilt work table and platen for slack belt sanding. The 1SK6 Kalamazoo Industries multi use combination sander is a 6” bench sander [...]

Comments Off on 1SK6 Kalamazoo Industries multi use combination sander

2SK7 7 Inch Kalamazoo Industries multi-position combination sander

By | 2018-05-09T11:18:12+00:00 May 9th, 2018|News|

2SK7 7 Inch Kalamazoo Industries multi-position combination sander comes standerd with 2” x 48” belt sander attachment features a 1/2HP 1PH 110V motor, spring belt tension, easy tracking, 7” removable grinding stone, removable tilt work table and platen for slack belt sanding. The Kalamazoo Industries 2SK7 is a 7” bench [...]

Comments Off on 2SK7 7 Inch Kalamazoo Industries multi-position combination sander

DS12V Kalamazoo Industries 12 inch disc sander with vacuum base

By | 2018-05-07T11:53:53+00:00 May 7th, 2018|News|

DS12V Kalamazoo Industries 12 inch disc sander with vacuum base has a 100 CFM vacuum dust collector to help contain abrasive particles produced during sanding. This can greatly improve the environmental conditions inside a shop. A door in the base allows easy access to the cloth bag filter, which can [...]

Comments Off on DS12V Kalamazoo Industries 12 inch disc sander with vacuum base

Kalamazoo Industries DS10 10 inch vertical disc sander

By | 2018-05-04T08:37:46+00:00 May 4th, 2018|News|

Kalamazoo Industries DS10 10 inch vertical disc sander is vertical disc sander originally was designed to meet a customer application. Kalamazoo Industries DS10 10 inch vertical disc sander features a 10” aluminum disc that can accommodate various psa adhesive discs. The enables the utilization of a single unit to achieve various [...]

Comments Off on Kalamazoo Industries DS10 10 inch vertical disc sander

Kalamazoo Industries DS12 12 inch vertical disc sander

By | 2018-05-02T08:21:12+00:00 May 2nd, 2018|News|

The Kalamazoo Industries DS12 12 inch vertical disc sander originally was designed to meet a customer application features a 12” aluminum disc that can accommodate various psa adhesive discs. The enables the utilization of a single unit to achieve various finishes. Other features include: 1HP 1PH or 3PH TEFC motor [...]

Comments Off on Kalamazoo Industries DS12 12 inch vertical disc sander

Kalamazoo Industries KM14HS high speed, non-ferrous mitre saw

By | 2018-04-30T08:31:26+00:00 April 30th, 2018|News|

The Kalamazoo Industries KM14HS high speed, non-ferrous mitre saw is a 14″ high-speed machine that can mitre non-ferrous materials such as aluminum, brass, or plastic 45 degrees left or right. The saw, now part of Kalamazoo Industries’ standard equipment line, originally was built to a customer’s special request for a [...]

Comments Off on Kalamazoo Industries KM14HS high speed, non-ferrous mitre saw

Kalamazoo Industries KM10HS 10 inch hi-speed non-ferrous mitre saw

By | 2018-04-27T08:54:16+00:00 April 27th, 2018|News|

Kalamazoo Industries KM10HS 10 inch hi-speed non-ferrous mitre saw that can mitre cut non-ferrous materials such as angle aluminum, brass and plastic 45 degrees left or right. The saw was originally built to a customer’s special request for a rugged, high capacity 10” mitre hi-speed non-ferrous mitre chop saw. The Kalamazoo [...]

Comments Off on Kalamazoo Industries KM10HS 10 inch hi-speed non-ferrous mitre saw