Most common problems and solutions to fix these problems, chop saw, saw, sanding, sanding belt
Contact us for pricing and or application questions. We can be reached at (269) 382-2050.
Subscribe to the Kalamazoo Industries youtube channel and click the notification bell to be alerted when we upload new videos

Most common problems and solutions to fix these problems

Most common problems and solutions to those problems

P: Blade is bouncing when blade comes into contact with the parts.

S: Bring part front of center at least ¼” from center (some   experimenting will need to be done).

P: My saw and or sander is rusting.

S: Use a coolant with an anti-rusting agent.

P: My saw spindle stopped rotating when the motor is spinning when I go to cut.

S: Depending on age the new v-belts either they have stretched after the first few cuts or need to tighten and or they have worn out. Either tighten v-belts by losing the four bolts and push the motor away from spindle and or replace v-belts.

P: My blade walks when trying to cut my material.

S: You most likely have an inferior blade that’s not breaking     down while it’s using to cut the material. So go with a reliable abrasive cutoff blade from a reputable manufacturer.

P: When I go to track my sanding belt it doesn’t stay tracked.

S: The drive pulley crown is worn and the pulley will need to be replaced or there is crud build up on the tension shaft and its needs a good cleaning or the spring is shot and needs to be replaced.

To recap are the most common problems and solutions to fix these problems regarding the Kalamazoo Industries industrial equipment.

In the mean time go to www.kalamazooind.com to see what industrial equipment Kalamazoo has to offer.

Give up a call with your application so we can figure out together a great solution to your applications.  We can be reached at (269) 382-2050.

Sign up to receive our tri weekly email blast.
Kalamazoo Industries online replacement part store.
Kalamazoo Industries resource center.