Having the correct belt sander for your sanding application, belt sander, Kalamazoo, sanding application, vacuum
contact us with your application questions. we can be reached at (269) 382-2050.
Subscribe to the Kalamazoo Industries Youtube and click the notification bell to be alerted when we up load new video’s

Having the correct belt sander for you sanding application

Having the correct belt sander for you sanding application is critical to have the ability to get your sanding job done and having the right finish.  So you have to take a few things into consideration.

  1. The overall size of your material that you need to sand (L x W x H).

  2. The overall weight of your material that you need to sand.

  3. How much material that needs to be removed (If you are removing a lot of material you will need a belt grinder)  Click here to be taken to the Kalamazoo Industrial belt grinder page. 

  4. You’ll then have to determine if your sanding job to have a slack belt (A belt sander without a platen).

  5. Then does your area need to be kept relatively clean?  If it does you’ll need a belt sander with either a port so you can hook up to your vacuum system or a unit with a vacuum system.

  6. Do you need a good finish so the material can be analysed?  If so you will need a wet belt sander to polish your cut sample.

So again having the correct belt sander for you sanding application is critical so you don’t have a belt sander that under powered and  have the correct sander that can give you your desired finish.

Click here to be directed to directed to the Kalamazoo Industries belt sander page.

Having the correct abrasive chop saw for your application.
Kalamazoo Industries online parts store. Shop NOW!
Do you have the right sanding belt for your sanding application?