Demonstrates how to track and change the belt on your Kalamazoo 1SM belt sander. Tracking the 1SM 1 x 42 belt sander is quick and easy regardless of age.  Tracking and  this sander is easy to do, all you do is loosen the black knob that’s located at rear of the unit slightly so the sanding head can freely move.  Once you’ve completed that you will need to hand track the belt (belt direction is down) then make sure it’s centered.  Once you have done that slightly tight so the head won’t move and track the belt while the machine is on then complete finale tracking while the machine is running.  Once that’s centered tighten knob and then your ready to sand and deburr.

To change the belt loose black knob but don’t remove knob, on the rear of the unit and draw the head down take old belt off and while the head is retracted put new belt on and complete belt tracking.

In conclusion this is how to track and change belt on your Kalamazoo 1SM belt sander.

How to track your Kalamazoo 1SM Inch Belt Sander, 1SM belt sander, How to track and change the belt on your Kalamazoo 1SM belt sander, Kalamazoo 1SM belt sander, 1SM belt sander