Kalamazoo Industries Inc, abrasive saws, belt sanders, belt grinders, 5C collet fixtures, vibratory finishers and specialty equipment, sanders, fixtures, abrasive saws, saws, belt grinders, grinder, special abrasive saws, specialty sanders, specialty grinders, dry saws, wet saws, dry sanders, wet sanders, 20" enclosed wet saw

K20E: 20″ enclosed wet metallurgical saw comes standard with a powerful 15HP 3PH (220V or 440V) standard with air/oil power down feed, oscillation and pump and tank system. 

Blue Ridge Fairmount Tool 3-24-10 completed test cut on our 20″ enclosed wet metallurgical saw.

Because this unit is completely enclosed it keeps the dirt, abrasive dust, metal dust and coolant off your shop or lab floor!

With the proper horse power and correct wheel the 20″ enclosed wet metallurgical saw is capable of giving bright, clean cuts.  This  can only happen if you have the correct abrasive wheel, horse power and the power down feed!

The K20E enclosed wet metallurgical saw is great for cutting and sectioning  metallurgical samples!

Specials can be made to fit your application!

Great for cutting hardened linear bearings with LITTLE to NO BURN!

Send us your samples to cut.  See the results before you buy! Guaranteed!

Talk to our experienced staff for your specific cutting needs!

  • Totally enclosed cabinet.
  • 15 or 20  HP SD motor, mag. starter.
  • 3 PH (220/440V) please specify
  • Side access ports for long stock
  • V-belt drive, sealed ball bearings.
  • Capacities: 4″ solid, 6″ shapes.
  • Air chain vise, 1″ spindle arbor, 1550 RPM, Also available in 32mm arbors.
  • Coolant pump, 10 gal., 1/3 HP., Dual coolant hoses.
  • Internal light. Front and side access doors.
  • Semi-automatic: saw head returns at end of cut.
  • Manual stock feed. Air over oil precises downfeed, 0-12 FPM feedrate.
  • Adjustable down stop limits depth of cut.
  • Dimensions L 50″ x W 34″ x H 80″. Wt. 800 lbs.
  • Options: Oscillation, cabinet door interlocks,  t-slot tables, X axis table, bed filter/ pump systems, air vises and specials made to customer specs.
  • Great for met labs!
  • Made in USA!, Available in 575 volt,  50 hz and CE.
  • Model: K20E 15 hp, 3 phase 220/440 volt 60 hz.
  • Model: K20E 20 hp, 3 phase, 220/440/60 hz

This 20″ enclosed wet metallurgical saw has applications in the following industries: Energy, Oil/Natural Gas, Petro/Chemical, Knife Manufacturing, Automotive, Metal Foundries, as well as many other Manufacturing and Fabrication environments.

K20E

See our demonstration video by clicking on the K20E to the left